Cart 0
Led Driver Dali 45/220-240/700 Ltcs with Ledset 4008321819192

Led Driver Dali 45/220-240/700 Ltcs with Ledset 4008321819192 (LEDOTDALI45700LTCS)

  • £40.78

In Stock (2 to 5 days)

OT DALI 45/220-240/700 LTCS

Product benefits

Versatile DALI window driver up to 45 W due to flexible output characteristic
Very high efficiency and reliability
Protection of the system thanks to thermal management and Smart Control
Different housings for various luminaire types with common dimensions of trad. ECG

Areas of application

Suitable for use in luminaires with flexible current setting
Suitable for installation in emergency lighting systems according to EN 60598-2-22
Suitable for indoor SELV installations
Installation and independent mounting via Cable Clamp Kit possible

EAN: 4008321819192
Nominal output power: 45 W
Partial load (not dimmed): 13 - 45 W
Input voltage AC: 195-264 V
Mains frequency: 50/60 Hz
Nominal output voltage: 35-120 V
Nominal output current: 50-700 mA (+/- 5%)
Nominal voltage: 220-240 V
Nominal current (at 230V): 0.23 A
Device power loss (max): 7 W
Power factor ? (full/minimum load at 230 V): 0.95/ 0.9
ECG efficiency (full load at 230 V): 87 %
Inrush current: 25 A
Max. no. of ECGs on circuit breaker 10 A: 18
Max. no. of ECGs on circuit breaker 16 A: 47
Galvanic isolation primary/secondary (SELV equivalent): 3.75 kV
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Length: 123 mm
Width: 79 mm
Height: 33 mm
Product weight: 244 g
Cable cross-section, input side: 0.2 - 1.5 sqmm (flexible/solid leads)
Cable cross-section, output side: 0.2 - 1.5 sqmm (flexible/solid leads)
Wire preparation length, input side: 8.5 - 9.5 mm
Casing material: Plastic
Ambient temperature range: -25 +50 C
Temperature range at storage: -40 +85 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
ECG lifetime (at Tcase = 70 C at Tc point/1-% failure rate) : 50000 h
Dimmable: Yes
Dimming range: 7 - 100 %
Suitable for fixtures with prot. class: I / II
Dimming interface: DALI / Touch DIM / Touch DIM Sensor
NTC input: Yes
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2 m
Type of protection: IP20
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015:2006 + A1:2007 + A2:2009/Acc. to EN 61000-3-2/Acc. to IEC 61547:1995 + A1:2000
Approval marks - approval: CE / VDE / ENEC 10
Manufacturer's Website:


Declaration of ConformityDownload
Family DatasheetDownload
Product DatasheetDownload
Technical Application Guide - The LEDset (Gen2) InterfaceDownload
Technical SupportDownload
Light is universal - Optotronic LED driversDownload

We Also Recommend