Menu
Cart 0
Led Driver Ote 35/220-240/700 Sd 700ma 4008321989543

Led Driver Ote 35/220-240/700 Sd 700ma 4008321989543 (LEDOTE35700SD)

  • £16.88

In Stock (2 to 5 days)

CC Power supplies with StepDIM

Product features

SELV equivalent
2 output channels
StepDIM interface: switch between two predefined output currents
Slim housing with separate plug terminals

EAN: 4008321989543
Output power: 35 W
Partial load: 12 - 35 W
Input voltage: 195 - 264 V
Mains frequency: 50/60 Hz
Output voltage: 16-50 V (max 60 V)
Output current: 700 mA
Nominal voltage: 220 - 240 V
Power factor ? (full/half at 230 V 50 Hz): 0.95/0.85
ECG efficiency (at full load): 85 %
Max. no. of ECGs on circuit breaker 10 A: 15
Max. no. of ECGs on circuit breaker 16 A: 26
Galvanic isolation primary/secondary: 3.75 kV
Surge capability (L/N-Ground): 1 kV
Surge capability (L-N): 1 kV
Lenght: 182 mm
Width: 41 mm
Height: 28 mm
Weight: 180 g
Cable cross-section, input side: 0.5 - 1.5 sqmm
Cable cross-section, output side: 0.5 - 1.5 sqmm
Wire preparation lenght, input side: 8.5 - 9.5 mm
Casing material: Plastic
Ambient temprature range: -25 +50 C
Temprature range at storage: -40 +85 C
Maximum temperature at tc test point: +70 C
Maximum housing temperature in case of fault: +110 C
ECG lifetime (at tcase = 60 C): 50000 h
Dimmable: Yes
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Maximum wiring lenght ECG/lamp: 2 m
Type of protection: IP20
Manufacturers Website: www.osram.com/osram_com/products/led-technology/indoor-ecg-for-led-modules-and-dimmers/constant-current-dimmable/cc-power-supplies-with-stepdim

Datasheets

Product DatasheetDownload
Technical SupportDownload
Light is universal - Optotronic LED driversDownload


We Also Recommend