Cart 0
Led Driver Ote 50/220-240/1a0 Cs Fan Constant Current 4052899919396

Led Driver Ote 50/220-240/1a0 Cs Fan Constant Current 4052899919396 (LEDOTE501A0CSFAN)

  • £15.38

In Stock (2 to 5 days)

OTe 50/220-240/1A0 CS FAN

Product benefits

Versatile scope of application due to output power range of up to 60 W
Efficient and reliable

Product features

Supply voltage 220-240 V
Line frequency 50 Hz - 60 Hz
Line voltage 198-264 V
Safety according to EN 61347-1, 61347-2-13, 62384
RI suppression according to EN 55015:2007+A1:2007/CDN
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime up to 50000 h (temperature at Tc = 65 C, max. 10 % failure rate)

Areas of application

Suitable for use in luminaires with flexible current setting (Tri-Tap)
Suitable for indoor SELV equivalent installations
Suitable for luminaires of protection classes I and II
Installation and independent mounting via Cable Clamp Kit possible

EAN: 4052899919396
Nominal output power: 50 W
Partial load: 19 - 56 W
Input voltage AC: 195 - 264 V
Mains frequency: 50 - 60 Hz
Nominal output voltage: 27 - 54 V, max. 60 V
Nominal output current: 700/900/1050 mA (+/- 5%)
Nominal voltage: 220 - 240 V
Nominal current(at 230V): 0.28 A
Device power losses: max 8.1 W
Power factor ? (full load at 230 V): 0.95
ECG efficiency (full load at 230 V): >= 88 %
Inrush current: 16 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 25
Galvanic isolation primary/secondary (SELV equivalent): 3.75 kV
Surge capability (L-N): 1 kV
Length: 103 mm
Width: 67 mm
Mounting hole spacing, length: 94 mm
Mounting hole spacing, width: 58 mm
Height: 29.5 mm
Product weight: 188 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 8.0-9.0 mm
Casing material: Plastic
Ambient temperature range: -20 +50 C
Temperature range at storage: -25 +70 C
Maximum temperature at tc test point: 95 C
Max.housing temperature in case of fault: 110 C
ECG lifetime (at Tcase = 85 C at Tc point/1-% failure rate) : 50000 h
Dimmable: No
Suitable for fixtures with prot. class: I / II
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2 m
Type of protection: IP20
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Approval marks - approval: ENEC 10 / CE / RCM
Manufacturer's Website:


Declaration of ConformityDownload
Light is reliable - Optotronic Compact LED driversDownload
Product DatasheetDownload
Technical SupportDownload
VDE CertificateDownload
Family DatasheetDownload

We Also Recommend